Your Search: "bontrager saddles"

Shimano compatible road caliper brake pads from Bontrager. Genuine replacement parts Reliable Bontrager stopping power for optimal operation and safety. - Sleek brake pads and cartridges are Shimano compatible - British Standard Compound (BS)—Long wearing pad compound - Exceeds all US standards for brake pads—Sticky rubber for improved braking - Sold in pairs

Genuine Bontrager cycling computer mounting accessories and replacement parts. - Ensure your computer stays properly in place. Replacement adapter for the Insta-Mount system - Universal mount permanently attaches to the back of your phone or other device - Use with Bontrager Trip mount for seamless Blendr capability

QuickClick mount for spring-style saddles. Works with all Topeak Wedge Bags. - Material: Injected nylon / Stainless steel - Weight: 50g / 1.76oz

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base

Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp

- HexAir Technology is a breakthrough in saddle comfort featuring patent pending hexagonal, air pockets and specially treated outer layer to provide a non-stick surface - Easily stretches over most racing and touring saddles - Silicone with a hexagonal air pocket grid design is fully waterproof and UV resistant - Available in two sizes for racing and touring saddles - -01: Racing saddles, 5.5" wide; -02: Comfort/Touring saddles, 6.6" wide

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles

Water-resistant saddle cover with silver reflective band on the rear. - Hook-and-loop fastening ensures a good fit on different sizes of saddles

Rain cover designed to be used when the bike is parked to avoid getting the leather saddle wet. A soaked leather saddle should not be ridden for long as it will deform the saddle’s shape.

Innovative, removable visor for select Bontrager helmets perfectly shields rain and sunlight. - Works perfectly with your Bontrager Quantum helmet - Original equipment replacement visor

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

The same great features and construction as found on our adult saddles but in a scaled down package that's perfectly sized for the stars of the future! - Generous padding and a subtly curved neutral shape makes this saddle a great all-arounder and suitable for all applications - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary) - Molded front & rear edge guard helps to protect the saddle from the inevitable bumps and scuffs that go hand-in-hand with kids bikes and ensures that there are no sharp edges - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 210 x W 130mm - Weight: 253g (excl. saddle clamp)

The same great features and construction as found on our adult saddles but in scaled-down, mid-sized package that's perfectly proportioned for youth riders. - Generous padding and a subtly curved and contoured neutral shape makes this saddle a great all-rounder and suitable for all applications - Raised tail and the dropped nose combine to help keep the rider in a position for optimal support and comfort - Ships with a traditional saddle clamp (7/8 fit) for dual compatibility with both older/traditional seatposts without an integrated clamp and newer seatposts with a built-in clamp (remove as necessary) - Molded front & rear edge guard helps to protect the saddle from the inevitable bumps and scuffs that go hand-in-hand with kids bikes and ensures that there are no sharp edges - Construction: Synthetic weatherproof upper, Nylon base w/ Hi-Ten steel rails - Dimensions: L 243 x W 130mm - Weight: 287g (excl. saddle clamp)

Get unbelievable traction in even the slickest winter conditions by adding Bontrager Tire Studs to your stud-ready winter tires. The carbide tipped design provides biting traction with an easy to install, durable design. Key features - Carbide-tipped design provides long lasting and durable traction - Compatible with Bontrager stud-ready tires - Use Bontrager Tire Stud Tool for easy installation

Quickly mount light and camera accessories on top of your Bontrager MTB helmet. - Quickly mount light and camera accessories on top of your Lithos helmet - Tested with accelerometer for intended breakaway point if involved in a crash

Get the most from your Bontrager Switch Lever thru axle system. Product details - Original equipment replacement lever for Bontrager Switch Flip thru axles - Can be kept inside the thru axle or left off the bike to save weight - Lever is held securely by internal O-ring on the thru axle

To be used exclusively with Bontrager Tubeless Ready (TLR) rims. The rim strips you need to upgrade to Tubeless These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Use only with appropriate Bontrager TLR rim valve - Rim strip replacement is recommended if removed from the wheel - Sold as singles - White strip is recommended for carbon rims - TLR rim valve sold separately

These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service

This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing

Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets. - Works with all Bontrager Ion and Flare lights

Aerodynamic seat bag holds tubes, tools and other repair items. Mounts with our innovative Quick Release Buckle system to fit all railed saddles. Specs: - BAG ATTACHMENT: Nylon straps / Buckle - MATERIAL: 1200 denier polyester - SEATPOST DIAMETER: Fits 27.2 - 34.9 mm - SIZE: 16 x 8 x 7.5 cm / 6.3" x 3.1" x 2.9" - CAPACITY: 0.41 L / 25 ci - WEIGHT: 85 g / 2.99 oz - ADDED FEATURES: 3M reflective strip, Safety light clip

The strong, lightweight IB-2 features ten essential tools in the compact form factor of our unique I-Beam handle. Perfect for on-the-ride adjustment of brakes, handlebars, saddles, or derailleurs. With its compact size, the IB-2 is a perfect tool for the saddlebag, jersey pocket, or toolbox.

The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory foam technology! - Temperature-sensitive memory-foam upper forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort - Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness - Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening - Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position - Fits wide cruiser/comfort saddles from approx. 200 - 230mm width - Dimension: L275 x 265mm - Weight: 282g

The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory-foam technology! - Temperature-sensitive memory-foam upper forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort - Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness - Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening - Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position - Fits wider fitness saddles from approx. 170 - 200mm width - Dimension: L 260 x 245mm - Weight: 245g

The affordable way to increase the level of padding of your existing saddle and raise comfort levels thanks to some innovative NASA-derived memory-foam technology! - Temperature-sensitive memory-foam padding forms perfectly to your body shape, ensuring perfect, constant adherence and maximum comfort - Ergonomic dropped central channel helps relieve pressure from the sensitive soft tissue area, preventing pain and numbness - Quick & easy installation - slips over existing saddle and secures via an adjustable drawstring fastening - Lycra stretch-fit construction with elasticated sides and a non-slip grippy inner surface helps keep the cover in position - Fits regular/narrower road & MTB saddles from approx. 130 - 160mm width - Dimension: L 275 x 195mm - Weight: 215g