Parts & Accessories

$119.99
For added protection in aggressive terrain, you have the option to add this removable, lock-on Super 3R chin bar to your Bell Super 3 Helmet (sold separately).

$74.99
- Men's Premium EPS Winter Liner w/ Boa Adjuster
- For Watts, Baker, Macon
- Old version Double-sizing: S/M (54-57cm), L/XL (57-60.5cm), 2XL-3XL (60.5-63.5cm)
- New vesion Single sizing: S (54-55.5cm), M (55.5-57cm), L (57-59cm), XL (59-60.5cm)

$69.99
- Fits all Scraper 3.0 models (HLC #850401)
- The perfect solution for fall and winter riding
- Not certified for ski/snowboard

$49.99
The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable.
- 12 Lumens
- Micro USB rechargeable
- 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours)
- Water Resistant
- 16 grams
- 26mm tall, 39mm wide, 20mm thick (w/o bracket)

$49.99
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$44.99
Magnetic mount lens for Lazer Urbanize helmet
The integrated lens is an integral part of the Urbanize helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
COMPATIBILITY
- Urbanize NTA MIPS
- ATTACHMENT: magnetic
- WEIGHT: 54g
- MATERIAL: Polycarbonate

$41.99
Key features
- Original equipment replacement Boa System for your Bontrager helmet
- Compatible with all Boa-equipped Bontrager helmets, except Velocis MIPS
- Can also be used to upgrade your Headmaster-equipped Bontrager helmet to the Boa System

$39.99
Replacement fit systems keep you comfy and secure
Fit systems work hard to keep your helmets secure and to maximize safety. No matter what happens, these original replacements will get them working like new
- Original equipment replacement Boa System for your Bontrager WaveCel helmet
- Not compatible with non-WaveCel helmets
- Full-length fit system designed for use with Medium and Large sized helmets
- Short length fit system designed to optimize the fit of Small sized helmets

$35.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager Blaze WaveCel helmet
- NoSweat keeps sweat out of eyes through channeled pads for constant clarity
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$35.99
New pads help your helmet fit best and smell fresh
Let's face it—we all sweat. Sweat stinks. Fresh pads will make your helmet smell, and fit, just like it did when it was new.
- Original equipment replacement fit pads for your Bontrager XXX WaveCel helmet
- NoSweat keeps sweat out of eyes through channeled pads for constant clarity
- Helmet fit pads should be replaced once a year to maintain fit and hygiene

$34.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: G1 MIPS, G1
- ATTACHMENT: G1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$34.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$34.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.

$34.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$29.99
Add the safety of visibility to your helmet and light up the trail, road, or commute with help from the Bontrager Helmet Mount. Easily attaches a light to most helmets.
- Works with all Bontrager Ion and Flare lights

$29.99
The Sport Recreational Helmet Vent Light is one of the easiest and most powerful ways to increase visibility and safety on the road.

$29.99
Lights, Camera, You Name it
The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back.
Features
- Omni-directional breakaway, 270 Degree Rotation
Page 1 of 4
Next page