Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$39.99 - $399.99
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$249.99
Cane Creek's 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.

$129.99
Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve.
- Springs feature the progressiveness and ramp-up that hard-charging riders demand
- Designed for use with Cane Creek Coil shocks
- Progression begins at 50% into the stroke of the spring
- Crafted from high-performance spring steel
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

$34.99 - $99.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

$99.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor

$99.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability.
- Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks
- Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP
- Compatible with Fox coil shocks with required spring clip adaptor

$69.99
Slamset top headsets are designed to keep the stack height low.
- Hellbender bearings with improved seal structure

$52.49
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost.
- Rebuild bushing tools
- LT arm screws (M4 x 20mm)
- Saddle clamp bolt (M5 x 35mm)
- Saddle clamp spherical washers
- Saddle clamp adjustment knob

$44.99
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$34.99
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$18.00 - $34.99
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$25.99
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models.
- Neoprene construction

$15.99 - $24.99
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$14.99 - $20.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

$17.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements

$17.99
Elastomers are designed for use with eeSilk seatposts, featuring different durometers that provide different levels of comfort.
- Extra Soft: 40 Durometer
- Soft: 50 Durometer
- Medium: 60 Durometer
- Firm: 70 Durometer
- Extra Firm: 80 Durometer

$17.99
eeSilk Stem elastomers were developed based on rider preference and varying surfaces.
Each eeSilk Stem includes 3 elastomers varying in firmness depending on stem length. We recommend first riding the elastomer that comes installed with the stem to form a baseline. Then change to a softer or firmer elastomer based on preference for more or less compliance.

$17.99
Elastomers are designed for use with eeSilk+ seatposts, featuring different durometers that provide different levels of comfort.
- Extra Soft: 40 Durometer
- Soft: 50 Durometer
- Medium: 60 Durometer
- Firm: 70 Durometer
- Extra Firm: 80 Durometer

$16.99
Cane Creek crown races are interchangeable between headset series.
- Required to fit RockShox Bluto on SM and MD Beargrease Carbon frames
- May be required to fit Manitou Mastodon Mukluk Carbon frames

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 47mm lower headset bearings
- Compatible with 33mm (1-1/4") tapered steerer tubes
- Lightweight aluminum construction

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction
- Allows the installation of a straight steerer fork without changing out the headset lower

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Lightweight aluminum construction

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower
Page 1 of 2
Next page