Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Chainrings
$222.00 - $230.00
Top quality design and materials in sizes to fit modern road and 'cross bikes.
- 7000 series aluminum provides strength and durability
- 52t for use with 36 or 38t
- 50t for use with 34t
$230.00
Replacement chainring in 130mm BCD for SRAM 11-speed Yaw speed road cranks. Replace worn out rings or swap to change gearing for specific uses.
- Top quality design and materials in sizes to fit modern road and 'cross bikes.
- 7000 series aluminum provides strength and durability
$384.00
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear
- Improved aerodynamics for time trial and triathlon
- Material: Aluminum
$1,283.00 - $2,114.00
- AXS enabled for easy monitoring and firmware upgrades
- Fully integrated power meter into a direct mount chainring
- Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride
- Power balance measures left and right legs separately
- SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control
- Laser-etched chainring finish is more durable
- 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks.
- Speeds: 12
- Chainring material: Aluminum
- Power Meter Type: ANT USB
$17.49
- Shimano, 22T, 9 sp, BCD 64mm, 4-Bolt, Deore FC-M590, Inner Chainring, For 22/32/44, Steel, Black, Y1LD22000
$19.99
- Chainrings for SLX FC-M675 double cranks
- Please refer to compatibility: 38T chainrings are available for 24T or 26T inner chainring and are not cross-compatible.
$19.99
- Shimano, Tiagra FC-4703, Chainring, Teeth: 30, Speed: 10, BCD: 74, Bolts: 4, Inner, Steel, Grey, Y1RD30000
$26.49
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
$27.99
Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.
$29.99 - $32.99
Shimano Ultegra 6800 11-Speed Inner Chainrings
- Material: Aluminum
- Ring Position/Type: Inner
$32.99
Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.
$37.49
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
$49.99
Shimano Dura-Ace 9000 11-Speed Chainrings.
- Chainring BCD: 110 Shimano Asymmetric
- Color: Black
- Defined Color: Black
- Drivetrain Speeds: 11
- Material: Aluminum
- Ring Position/Type: Inner
$56.99
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction.
- Chainring BCD: 110 Shimano Asymmetric
- Drivetrain Speeds: 11
- Material: Aluminum
- Ring Position/Type: Inner
$88.99
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
$89.99
The Shimano Deore XT SM-CRM85 chainring is designed for use with Shimano's M8100 and M8130 1x cranksets.
- Special MTB gear tooth profile with Dynamic Chain Engagement+ improves chain engagement and retention
- Direct Mount Type: Direct Mount Shimano
- Tooth Count: 28T, 30T, 36T
- Drivetrain Speeds: 12
- Defined Color: Black
- Ring Position/Type: Chain-Retaining Single Ring
- Round or Oval: Round
- Chainline/Hub Compatibility: 141/148 Boost Hubs , 157 Super Boost Hubs
$109.99
- Shimano, GRX FC-RX600 2x10 / 2x11, Chainring, Teeth: 46, Speed: 10, BCD: 110, Bolts: 4, Outer, Aluminum, Black
$119.99
- Shimano, GRX FC-RX810 1x11, Chainring, Teeth: 40, Speed: 11, BCD: 110, Bolts: 4, Single, Aluminum, Black
$124.99
- Shimano, GRX FC-RX600 1x11, Chainring, Teeth: 40, Speed: 11, BCD: 110, Bolts: 4, Single, Aluminum, Black
$189.99
- Better chain engagement for greater chain retention
- Special gear teeth profile designed for MTB riding usage
- Smoother driving even over bumpy terrain
- For XTR FC-M9100-1, M9120-1 cranks
$194.99
- Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 31, Speed: 11, BCD: 80, Bolts: 4, Inner, Aluminum, Black
- Shimano, GRX FC-RX810 2x11, Chainring, Teeth: 48, Speed: 11, BCD: 110, Bolts: 4, Outer, Aluminum, Black
$259.99
Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command.
- Bolt circle diameter: 4-bolt 110mm asymmetric
- 50T pairs with 34T inner ring
- 52T pairs with 36T inner ring
- 53T pairs with 39T inner ring
Inner rings sold separately
$369.99
The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a more reinforced outer chainring on its unique asymmetrical four-arm spider construction.
- Chainring BCD: 110 Shimano Asymmetric
- Drivetrain Speeds: 11
- Material: Aluminum
- Ring Position/Type: Outer
$21.00
- DualHex kits: 5mm-broach bolts with 6mm-broach nuts for secure 2-wrench assembly
- Triple kit can be used on 5-arm or 4-arm mountain/road cranks (includes 5 inner chainring bolts in addition to middle/outer bolt/nut set)
$23.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains.
- Material: Aluminum
$37.00 - $44.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
- 104mm BCD
- Material: Aluminum
$37.00
- The oversized chainrings are CNC machined 7075 Aluminium blanks—2mm thicker than the competition.
- Unparalleled stiffness is delivered by an increased Bolt Circle Diameter (BCD) and a two-piece insert-molded carbon composite construction.
- The XX Crank geometry provides a narrow 156mm Q factor, efficient chainline, and beveled crank arms to maximize clearance.
- X-Glide is the pure science in action common denominator that gives XX its unmatched shifting performance.
- 80mm BCD
$41.00
- Trushift chainrings feature shift ramps and pins
- Drivetrain compatibility: 8, 9, 10, 11
- 104mm BCD
$84.99
The Pathfinder sprocket is 8mm thick and uses a unique 9-sided design that allowed WTP to integrate the sprocket mounting location into the spoke pattern, resulting in a super-clean looking sprocket with plenty of strength and longevity even for the most savage rider out there.
- Full CNC 6061-T6 alloy
- 9 rotation points for longer life
- Sunken adapters for perfect chain line
- Made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles
$144.99 - $159.99
Felix Prangenberg signature super-tough 8mm-thick street sprocket/bash guard combo with 9 sprocket bolt holes integrated into the design for extra long life.
MATERIAL:
- Full CNC 6061-T6 alloy
THICKNESS:
- 8mm
SIZES:
- 25T, 28T
SPECIAL FEATURES:
- Bolt-on bash guard made exclusively for the Wethepeople Pathfinder sprocket
- Securely attached using x4 hollow crmo sprocket bolts
- 9 rotation points for longer sprocket life
- Available as an upgrade for your current Pathfinder sprocket, or as a combo pack