HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
This rear mount hydration system mounts to standard 7mm saddle rails and sits flush to rear of saddle. Featuring an innovative elliptical arch clamp for tilt adjustability. - 14" adjustment for case to glide under saddles with a transition tab - Precision machined stamped 6061-T6 construction - Capacity to hold one (included) or two Profile Design Vise Kages - Weight: 200g
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
This high-tech, full-carbon cage is the perfect upgrade for your race-ready rocket. Bontrager's Race XXX Lite Cage offers exceptional bottle grip with virtually no weight addition. Plus, these sleek bottle binders add top-end trim that enhances the look of any bike.
A cage that won't slow you down This OCLV carbon fiber cage is so lightweight you'll hardly know it's there. (That is, until you reach down and remove your water bottle with ease.) Recommended for on-road use with small water bottles. - Strong and lightweight OCLV Carbon construction - Secure bottle retention designed for road bikes - Recessed bolts allow smooth bottle transition and better derailleur clearance - Includes lightweight alloy mounting screws - Weighs only 20g
It's the perfect finishing touch for your super-light carbon bicycle: Look's Carbon Bottle Cage. It's made of carbon and weighs a scant 24 grams. This beautiful cage holds bottles securely over even the bumpiest roads with the help of rubber grippers on the inside.
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
Quickly and efficiently take care of your aero hydration and computer holding needs with the Bontrager Speed Concept carbon Computer Cage. It allows bottle access while maintaining aero position and also incorporates an integrated bike computer mount. • Carbon fiber cage construction • Designed to be mounted to the Speed Concept Mono Extensions • Adjustable track mount system can mount to standard water bottle spacing and adjusted for perfect placement • Securely holds standard water bottles • Integrated computer mount will accept standard bar-mounted computer mounts • Adapter for SRM computer mounts included
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
Blackburn's Carbon Cinch Cage embodies an elegant and sleek design that has a firm grip to keep your bottles cinched down. - UD Carbon Fiber - Uni-Directional carbon fiber material allows for maximum strength, and minimal material for ultimate weight savings - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Black Matte is the lightest color/finish combination. Weight may vary up to 3 grams between other colors/finishes. - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 78mm/3.07in - Height 78mm/3.07in - Weight-16g/0.04lbs
- 5mm titanium tubing construction - 26 grams - Incredible strength-to-weight ratio
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
Lezyne's Road Drive Carbon Cage is a lightweight cage made of FCT carbon fiber with optimized architecture for accommodating a wide range of bottle shapes and sizes. The strong cage ribs, top catch and bottom bridge are designed to increase cage strength and grip, preventing bottles from ejecting. A pump bracket is integrated into the cage body. With the included Velcro strap, a Road Drive pump can be held securely in place. The low profile design and ovalized mounting holes allow this cage to fit on both small and large frames.
- Full UD Carbon cage - Bolts included - Rigid clamping - Lightweight - Fits 74mm bottles
3T's Bottle Cage LTD is a lightweight, all-carbon, open cage for standard-sized bottles. It's finished in UD Gloss Black, with 3T's logo and the Italian tricolor center-stripe detail.
The Blackburn Clutch Cage proves that side entry bottle cages don't need to be hard to use. This high-end cage is designed to accommodate smaller and/or full suspension frames where standard cages do not fit. Slotted bolt holes allow for finely tuned adjustments, so it's easy to pull your bottle out no matter the shape or size of you favorite steed. The Clutch Cage is available in left or right entry and comes in four colors. - Designed for off road use - Left side bottle entry specific design - 30mm of vertical mounting adjustment - Made of rugged UD carbon fiber - 22 grams - Available in 4 colors
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
This is the rebirth of Blackburn's successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike, the Camber Cage pulls double duty, and looks good doing it. - Different color and finish options lets you pick a cage to match your bike - UD Carbon layup provides a smooth finish that reflects current carbon frame designs - “Rib cage” retention design hugs your bottles securely - Flared top opening assists with aligning your bottle to the cage while on the fly - 30 grams
Topeak's super light and stiff aerospace-grade carbon cage is the high-zoot accessory for your dream bike. In fact, at 20 grams it's one of the lightest cages out there! It holds securely and won't scratch, corrode or stain your bottles.
The full carbon construction of the RXL Carbon Cage provides climbers with a lightweight solution while the robust design securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes. Key features: - Full carbon construction - Suitable for road and mountain use - Includes alloy mounting screws - 23g
• Ultra Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 14 Grams +/-
• Super lightweight carbon construction • Tubular carbon rails for a sleek look • Special rubber grommet secures all water bottles • Weight: 21 grams +/-
• Super Lightweight Carbon Construction • Optimized Bottle Retention Design • Fits Most Water Bottles • Weight: 19 Grams +/-
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
The B-Tab is a low-profile horizontally-mounted BTA (between the arms) system. It features the versatile Side Axis Kage which allows riders to choose either a left or right side bottle release. The system can support both standard water bottles and the Aero HC. Alternatively, the system can be rotated to mount a standard bottle vertically. A hinged bracket design allows for quick and easy install and removal. - Can be rotated to mount vertically - Compatible with 31.8mm basebar - Offset design provides fore/aft adjustment - Hinged bracket design for quick installation and removal - 10mm wide bracket
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
With Profile's Aqua Cell, your favorite drinks are just a straw sip away! This durable, injection-molded system features two chambers so you can optimize your hydration with multiple drinks. The main chamber holds 35 ounces and the secondary chamber holds 15 ounces. And, the top caps open easily for on-the-go refills. The Aqua Cell also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Page 1 of 5 Next page