Filter By:
Parts & Accessories
$449.99
For your most precious cargo
Fetch+ 4's generously sized cargo box has room for a child seat in addition to the two reclining chairs that come with the bike. Use this adapter for Britax Römer car seats.
Easily mount a Britax Römer child seat to your Fetch+ 4 with this convenient adapter.
- Mounts to the front of the cargo box with the child seat facing the rider
- Maximum combined weight (child seat + child) must not exceed 18kg (39 lbs.)
- Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.)
- Adapter for Maxi-Cosi, Cybex, and Nuna child seats available separately
- Includes all installation hardware
$449.99
For your most precious cargo
Fetch+ 4's generously sized cargo box has room for a child seat in addition to the two reclining chairs that come with the bike. Use this adapter for Maxi-Cosi, Cybex, and Nuna car seats.
Easily mount a Maxi-Cosi, Cybex, or Nuna child seat to your Fetch+ 4 with this convenient adapter.
- Mounts to the front of the cargo box with the child seat facing the rider
- Maximum combined weight (child seat + child) must not exceed 18kg (39 lbs.)
- Do not exceed a gross vehicle weight (bike, riders, cargo) of 200kg (440 lbs.)
- Adapter for Britax Römer child seats available separately
- Includes all installation hardware
$157.00
Fit Kit SET806 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your fat bike with a 12mm rear thru axle.
This kit includes:
- 12 x 209mm thru axle with 1.5 mm thread pitch
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware
- Clear protective tape
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm..
$157.00
Fit Kit SET809 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 209mm thru axle with 1.75 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET807 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 217—229mm thru axle with 1.75 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET723.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle..
This kit includes:
- 12 mm thru axle with 129 to 135 mm length and 1.0mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack’s load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
Fit Kit Finder: https://oldmanmountain.com/fit-kits-and-spare-parts/#fit-kit-finder
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET706.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.
This kit includes:
- 12 x 125mm thru axle with 1.0 mm thread pitch, with spacer for 119mm spacing
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits.
- Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET712.R contains all the parts to mount the rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.
This kit includes:
- 12 x 122mm thru axle with 1.75 mm thread pitch
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle..
This kit includes:
- 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch
- Spacers to reduce the length to 128 mm
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
If mounting on a Fox Gravel Fork, please also order 377-1240.
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET810 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
This kit includes:
- 12 x 192—198mm thru axle with 1.75 mm thread pitch
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware
- Clear protective tape
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$153.00
Fit Kit SET727 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 135 mm thru axle with M15 x 1.5 mm thread pitch, with a spacer to reduce to 130mm
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$114.00
Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs.
- Provides 3-pack mounts on any thru-axle fork
- Axle Pack is rated to 10kg per pair
- Four mounting points you can also choose to run your gear higher or lower depending on your needs
$67.99
The Pet Cover for the DairyMan Rear Basket will certainly be the perfect pet carrier for your bicycle. The Pet Cover easily attaches to the DairyMan Rear Basket using a drawstring. It also has a full zip opening so you can easily put in and take out your small pet. The top of the Pet Cover is made with a mesh material for breathability and constant airflow. Most importantly, the Pet Cover comes with a bottom pad for your pet to have a comfy ride!
- Size: 15" x 13" (fits most baskets of this size)
$65.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it.
- Mounts to the B-RAD system or on its own
- Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$54.99
The Topeak Backloader Wishbone attaches to the saddle, and provides anti-sway for large saddle bags. In addition, the Wishbone has bottle cage mounts to allow 2 additional bottles to be carried.
A handy accessory to add to your bikepacking repertoire that keeps the backloader or any large seat bag from swaying back and forth.
- Fits rear bags 18cm/7" wide
- Bottle cage bolts included, max load 4.4lbs
- Mounts to any standard seat rails. Not compatible with monorail or spring/bumper saddles
$49.99
- The Basil Buddy Space Frame can be used in combination with the Basil Buddy Dog Bicycle Basket.
- This wire dome is made from hard-wearing steel and prevents your dog from jumping free of their basket while you’re out riding.
- This wire dome comes in classic black.
- Provides complete protection for your dog and total peace of mind for pet owners when out cycling.
$49.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$49.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$38.49
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options.
- Fits tubes 20-60mm.
- Engineering grade polymer
- 64 mm mounting height adjustable
- Weight: 128g
- Max load: 3kg / 6.61lb
- Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$37.99
Assemble your cargo rack properly with genuine replacement parts.
Details:
- Original equipment specifications
- For use with adjustable Electra MIK rear rack
- Includes all mounting hardware
$36.50
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle.
- On-bike storage solution
- Inner sleeve to compress the tube
- Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc.
- Wide strap and durable metal buckle
- Silicone and rubber grip for stability
- Compact and lightweight
- Attach under the seat or other locations on the bike frame
- Weight 4oz
$34.99
An adapter plate that easily mounts to many trunk bags to add the versatility of the MIK rack and bag system.
Add the versatility of MIK to your bags and racks
The adapter plate mounts to bike trunk bags with 10cm-wide rack mounting slots, bringing the benefits of the MIK system to your standard bike bag. When you add this adapter, you'll be able to secure bags to your MIK-compatible rack to help deter theft, while ensuring it's still easy for you to remove them when you need to. Hardware included.
Product details
- Adapter plate adds MIK compatibility to trunk bags and baskets
- Easily mounts to bags with 10cm-wide rack mounting slots
- Compatible with most Electra bags
- Securely mounts with just four bolts
$34.99
A carrier plate that easily mounts to most racks to add the versatility of the MIK rack and bag system.
Add versatility to your rack with MIK
The adjustable-width MIK (Mounting Is Key) Carrier Plate mounts easily to most racks, giving you all the benefits of MIK's unique keyed install system. This adapter allows you to secure MIK-compatible bags to your rack to help deter theft while ensuring it's still easy for you to remove them when you need to. Hardware included.
Product details
- Adds MIK compatibility to traditional bike racks
- Securely mounts with just four bolts
- Adjustable mounting width from 100mm to 170mm to fit most racks
$34.99
LOAD AND GO. Giant offers a complete line of racks to meet your cycling needs. Choose the quick access and convenience of the MIK rack system or the simplicity and classic feel of the Racktime rack deck—both pair perfectly with your on-bike carrying systems.
- Designed for the MIK system
- One size
- Please contact us for questions regarding your E-Bike's compatibility
Page 1 of 3
Next page