Accessories

The PRS-30 solves one of the biggest challenges of e-bike maintenance, repair, and cleaning: getting it off the ground. With a footprint no larger than a traditional bicycle repair stand, the PRS-30 easily lifts and lowers bikes up to 120 lbs. (54 kg) with ease. The professional-grade clamp lowers to a height of 29" (74 cm), allowing you to clamp onto the seatpost or seat tube of most bicycles without needing to lift them into the stand. From there, the PRS-30 features 23" (58 cm) of height adjustment, elevating the bike to a comfortable position for removing wheels, tuning the drivetrain, cleaning the chain, or any other procedure. Height adjustment is accomplished using an internally-geared mechanism driven by a simple hand crank. Height can also be adjusted using a common battery-operated drill with 10 mm socket for truly effortless lifting of heavy bicycles. Built to the same standards as our legendary professional repair stands, the PRS-30 is built from all-steel components and powder coated for a lifetime of use. The PRS-30 features sturdy legs with integrated wheels for easy repositioning. - Maximum weight capacity: 54 kg (120 lbs.) - Product weight: 20 kg (44 lb) - Clamp capacity: round and aero tubes from 23 to 76 mm (7/8" to 3") wide - Jaw height: 70 mm (2.75") - Clamp height: adjustable from 74 to 132 cm (29" to 52") - Clamp can also be installed 10 cm (4") lower for a height range of 64 to 122 cm (25" to 48") - Full stand height at maximum height adjustment: 157 cm (62") - Replaceable jaw covers (part #1960)

The combined forces of Wahoo's proven power algorithms and SPEEDPLAY’s advanced features set SPEEDPLAY POWER power pedals a cut above the competition. By capturing total power, left-right balance and cadence, SPEEDPLAY POWER DUAL delivers all the actionable data required to generate performance improvements. Pair with the full Wahoo Ecosystem of smart devices to track, analyze, and share your breakthrough gains. Tech Specs: - Physical Dimensions: 9 x 4cm - Country of Origin: Vietnam - Weight: 276g per pair - Stack Height: 13mm (3 hole) - Q Factor: 55mm - Body Material: Grivory - Spindle Material: Stainless Steel - Bearing Type: Triple Sealed Cartridge & Needle Bearings - Cornering Clearance: 39° - Cleats: Standard Tension Included (Easy Tension Compatible) - Release Angle: Micro Adjustable from 0° to 7.5° - Pedal Float: Adjustable from 0° to 15° - Cleat Fore-Aft Adjustability: Up to 13mm - Cleat Left-Right Adjustability: Up to 6mm - Walkable Cleat: Yes (adaptor included) - Battery Life: Up to 75 hours - Connectivity: ANT+, Bluetooth - Max Rider Weight: 250lbs Wahoo Speedplay pedals are designed for road cycling only. For the best riding experience, ensure your cleats are clean before and during every ride. Off-road cycling can result in damage to the cleats and/or debris becoming lodged in the cleats.

It looks like it’s from the future, but it’s here now. Our lightest, stiffest, and most accurate integrated power meter and chainring combo is now on Force. Quarq D-Zero technology is accurate to +/-1.5% and isn’t affected by temperature changes, and the consistent 13-tooth gap on the rings ensures fast and reliable shifting. Not just unbeatable on performance, our integrated rings are also incredibly long-lasting. And let’s not be modest: the combination of these rings on our iridescent carbon crank arm is the best looking thing out there. FEATURES - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability and simplicity

When you need the absolute best from your training data, the pro-proven accuracy and reliability of the RED AXS power meter is the way to go. Integrated into the chainring itself, it’s light, stiff and aero, accurate to +/-1.5% even as weather conditions change, and retains chains even when you hit rough stuff. Features - AXS enabled for easy monitoring and firmware upgrades - Single-ring drivetrain simplifies functionality - Fully integrated power meter into a direct mount aero chainring - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Available in 48T, 50T, 52T, 54T, 56T, 58T, 60T, 64T, and 68T

- 500WH. - Pakyak auxiliary battery holder sold seperately. - Extend your range and ride time with an optional 500WH EnergyPak battery. - Fits perfectly inside the PakYak storage case. - Dimension: 40cm X 7cm X 7cm. - Weight: 3.1kg.

The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8000 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Measure your ride power data more accurately than ever with the Force AXS power meter. We built upon the stability and accuracy of the RED AXS integrated power meter, now providing riders even more options for customization and serviceability at the Force level. Riders will also be able to thread on and off desired chainring sizes for unmatched performance. Features - Power meter is fully integrated into the chainring for lighter weight - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Crisp and accurate front shifts - DUB bottom bracket adds durability and simplicity - 46/33T, 48/35T or 50/37T chainring combos available - Available in 160, 165, 170, 172.5, and 175 mm lengths

- 150lb holding capacity - Includes work tray (#105) (900119-01) - Base not included (900706)

The latest innovation from Wahoo will literally take your indoor training to the next level! KICKR CLIMB indoor grade simulator is designed to work exclusively with the Wahoo KICKR Smart Trainers and when paired, it will add physical grade changes to your indoor training. The KICKR CLIMB is compatible with Third Party Apps, so whether riding a virtual course or performing a structured workout, KICKR CLIMB blends ascents and descents with resistance changes for a truly immersive indoor training experience. The world isn’t flat; now, neither is your ride! Features - Real-time grade changes - App controlled - 20% maximum incline - -10% maximum decline - KICKR smart trainer compatible - KICKR desk compatible - Wahoo ELEMNT bike computer compatible - Direct proximity pairing - Locked and unlocked climbing modes - Manual grade adjustments with remote control - Quick release and thru-axle bike compatibility - LED indicator lights - Professional grade durability - Third party app compatibility

The XX Eagle AXS Transmission Power Meter Crankset utilizes our World stage proven XX crank arm with a subtly integrated power meter to record and deliver live, accurate power readings to your head unit. We achieve this by utilizing what we call “DUB-PWR” – a unique design that elegantly houses Quarq’s reliable and accurate power measurement inside the DUB crank spindle itself. Measuring left-side power to calculate total watts, it’s subtle, lightweight, compatible with any chainring setup, and boasts unbeatable battery life. It is also compatible with the Flight Attendant system, allowing for total connectivity between all AXS enabled components. No-compromise, no-fuss data delivery giving you an edge over the competition. FEATURES Innovative DUB-PWR design allows for lightweight, subtle Quarq power integration. Compatible with Flight Attendant Unique, groundbreaking design integrated with our medal-winning carbon crank design. +/- 3% accuracy Long battery life (400+hours) User replaceable AAA lithium battery Waterproof (IPX7 waterproof to 1 meter for 30 minutes) 32-36T rings Can be run with chainring bash guards

Get precision power for all your rides. The Rally™ RK210 power meter pedals for road (compatible with LOOK KEO cleats) provide accurate power data and allow you to easily swap to Rally™ XC210 off-road pedal bodies. RK210 models are dual-sensing for additional metrics, including left/right balance and more.

Get precision power for all your rides. The Rally™ RS110 power meter pedals for road (compatible with SHIMANO SPD-SL cleats) provide accurate power data and allow you to easily swap to Rally™ XC110 off-road pedal bodies. Rally RS110 features a single power sensor to track total power and cadence, with the option to upgrade later to dual sensing. The redesigned pedals are made of carbon for reduced weight and enhanced durability. They’re also rechargeable with up to 90 hours of ride time. Put your pedals in travel mode during transport to conserve battery life. These power meters are highly responsive and +/- 1% accurate. To maximize accuracy, the Pedal IQ™ smart calibration feature alerts you when you need to calibrate based on several factors.

The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Record 12s crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Record or Chorus crank arm. It will NOT mate with a Campagnolo Super Record crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

- 500WH. - The top pull functionality is easy to access and remove from the E-bike. - Offers two possibilities for charging: on the E-bike or off the E-bike. - The weight of this EnergyPak is 3.2kg. - Includes side cover. - 40 cells. - Maximum charging current: 4A.

- 500WH - Easy to carry - Rack offers extra protection for the EnergyPak - Total weight of 3.1 kg - Easy to charge on the bike or at home - 40 cells - Maximum charging current: 4A - Weight: 3.1 kg

The Bosch PowerPack 500 is the same size as the PowerPack 400 and only slightly heavier, but offers a longer range. When using the Bosch Standard Charger, this lithium-ion battery requires about two hours to charge to 50% and approximately 4.5 hours to charge fully. Once fully charged and together with the Performance Line Cruise, the eBike can ride up to 56 miles. The PowerPack 500 comes as a frame or rack model for all eBike product lines.

Built to withstand the rigors of every day shop use, the PRS-3.3 is the stand of choice for professional mechanics around the world. Stand height and clamp position are firmly secured in place using our proven lock block system. Built from heavy-gauge oversized steel tubing, then chrome plated and powder coated for years of carefree use. The PRS-3.3-2 features our 100-3D Micro-Adjust Clamp with narrow clamping jaws and a dual-stage, cam-actuated system that quickly adjusts to accommodate nearly any seat tube or frame size. - Maximum weight capacity: 120 lbs. (54 kg) - Clamp capacity: 0.875" to 3" (22–76 mm) diameter tubes, including aero tubes - Clamp jaws are nominally 2.75" (70 mm) wide - Clamp height: adjustable from 50" to 62" (128–158 cm) - Includes #105 Cast Aluminum Work Tray & RPP-1 Repair Stand Post Protector - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)

Measure your ride power data more accurately than ever with the Force 1 AXS power meter. It’s the lightest and stiffest integrated Force power meter we’ve developed yet. It’s accurate to +/-1.5%, unaffected by temperature changes and the direct mount X-SYNC chainring is aero and longer-lasting. Features - Power meter is fully integrated into the chainring for lighter weight and greater accuracy - Power readings are accurate within +/-1.5% and aren’t affected by climate conditions during a ride - Measures right and left leg power balance - DUB bottom bracket adds durability and simplicity - Available in 160, 165, 170, 172.5, and 175mm crankarm lengths

The premium Edge 1050 cycling computer features a vivid color touchscreen, up to 20 hours of battery life, and 60 hours in battery saver mode. It provides alerts for road hazards and in-ride messaging when connected to your smartphone and Garmin Connect app. It integrates with Garmin training plans for personalized workouts and adapts to your performance with a compatible power meter and heart rate monitor. A built-in speaker offers clear prompts and a bike bell. Garmin Pay enables contactless payments for added convenience. - Premium GPS cycling computer with a vivid color touchscreen for superior navigation, performance tracking, and smart connectivity - Battery life - Up to 20 hours in demanding use cases, or 60 hours in battery saver mode - Stay connected with road hazard alerts, in-ride messaging, live locations, and incident detection via Garmin Connect app - The built-in speaker provides workout and navigation verbal prompts, and alert riders and pedestrians ahead of you with a loud on-device bike bell. - Personalized workouts and coaching that adapt to training load and recovery, with real-time stamina insights and power guide features - Make purchases on the go with Garmin Pay contactless payments. Garmin Pay lets you make purchases quickly and almost effortlessly with nothing needed but your 1050 Specifications: - Rechargeable Battery: Yes - WIFI: Yes - Color Screen: Yes - Cadence: Yes - Requires Additional Purchase - GPS Enabled: Yes - Heart Rate: Yes - Requires Additional Purchase - ANT Compatibility: Yes - Touchscreen: Yes - Wireless: Yes - Bluetooth Compatibility: Yes

Premium Outdoor Multisport Watch Built for military-level durability with sapphire glass and ultra-long battery life. Polar Grit X Pro equips you with new navigation tools, always-on outdoor features and Polar's ultimate training solutions so you can go wherever your heart takes you.

The PRS-30 solves one of the biggest challenges of e-bike maintenance, repair, and cleaning: getting it off the ground. With a footprint no larger than a traditional bicycle repair stand, the PRS-30 easily lifts and lowers bikes up to 120 lbs. (54 kg) with ease. The professional-grade clamp lowers to a height of 29" (74 cm), allowing you to clamp onto the seatpost or seat tube of most bicycles without needing to lift them into the stand. From there, the PRS-30 features 23" (58 cm) of height adjustment, elevating the bike to a comfortable position for removing wheels, tuning the drivetrain, cleaning the chain, or any other procedure. Height adjustment is accomplished using an internally-geared mechanism driven by a simple hand crank. Height can also be adjusted using a common battery-operated drill with 10 mm socket for truly effortless lifting of heavy bicycles. Built to the same standards as our legendary professional repair stands, the PRS-30 is built from all-steel components and powder coated for a lifetime of use. The PRS-30LB does not include legs or a base plate. It can be mounted to a #130 Repair Stand Base or directly to the floor using the FP-2 Floor Plate (both sold separately). - Maximum weight capacity: 54 kg (120 lbs.) - Clamp capacity: round and aero tubes from 23 to 76 mm (7/8" to 3") wide - Jaw height: 70 mm (2.75") - Clamp height: adjustable from 74 to 132 cm (29" to 52") - Clamp can also be installed 10 cm (4") lower for a height range of 64 to 122 cm (25" to 48") - Full stand height at maximum height adjustment: 154 cm (60.5") - Replaceable jaw covers (part #1960) - Can be installed onto the #130 Repair Stand Base or bolted directly to the floor using the FP-2 Floor Plate (both sold separately)

- Repair bike stand with two clamps is designed for service workshops and more demanding users. - Does not include base plate - Stand is adjustable by height between 947 and 1570mm - Replaceable rubber jaw covers, item 1693.11

The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case

The THS-1.2 is a great addition to any trailhead, park, campus, apartment building, school, bike shop or anywhere else riders may need some help to get back on their bikes. This weather-proof stand features a super-stout cradle stand to get both wheels off the ground, making any adjustment easier. includes six carefully-chosen tools capable of helping with a wide variety of minor repairs and adjustments, securely mounted on vinyl-coated 1/8" galvanized cable. All-steel construction, plated then powder coated to withstand the elements, with tamper-proof assembly fasteners for added security. Can be bolted directly to an existing post, permanent structure, or to the THP-1 Post (available separately). - Dimensions of tool box: 12.2" x 8.7" x 2.6" (31 x 22 x 6.6 cm) - Tubes extend 17" (43 cm) from mounting surface Includes weatherproofed versions of the following tools: - AWS-11 Folding Hex Wrench Set - SD-2 Screwdriver — #2 Phillips - SD-6 Screwdriver — 6 mm Flat Blade - PW-5 Pedal Wrench - TL-5 Tire Lever Set - TWS-2 Folding Torx-Compatible Wrench Set

Every athlete has a dream. The Polar Vantage V3 is the realization of it. It’s been designed to push you in every realm of human endeavour: in sports, performance, and in life. With an ensemble of biosensing instruments, AMOLED display, dual-frequency GPS, maps, and the most comprehensive suite of training and recovery tools on the market, Vantage V3 is the most powerful Polar to date. And with multiple days of battery on a single charge, plus all-new wrist ECG, SpO2, and skin temperature sensing, the stage is set, and the Polar Vantage V3 smart sports watch is ready to put in the performance of a lifetime. All you have to do is Act as an Athlete.

The Micro Modular Bearing Press Kit is designed with smaller hub and suspension bearings in mind. With drifts to service bearings with an inside diameter of 13 millimeters and smaller this is a great choice for those smaller more delicate bearings. The press head features a true thrust bearing, this unique feature keeps the press action super smooth and cuts down on the effort required. The thrust bearing isolates all of the torque from the compression which allows your bearing to go in square. It works so well that you don't need even need handles. The press head has a 6mm hex in the top of the press head so you can use it as a bail out gear in case you find something that is fitting excessively tight. Drifts included to precisely fit bearing sizes: 608 609 619 688 6000 6001 6701 6800 6801 6802 6900 6901 6902

- Swiss made, high precision spoke tension instrument - Measures spoke tension for all types of spokes (including bladed, butted, Ti, etc.) - Aluminum construction with precision dial - Includes injection molded plastic storage case and (Nm)-calibration chart

This press is the backbone of any modern shop. Bearing related work is becoming more and more common on modern bikes and no shop, professional or amature should pass over these tools. The Modular bearing press starts with the press head. Where most manufactures just have a glorified nut we went further by adding a massive thrust bearing. Not a wimpy little plastic washer either, an actual bearing with balls and races. What this means is that the pressing action is almost completely isolated from the torque, creating a super smooth pressing action that requires noticeably less effort. Then we added a pair of 5" machined handles for a little extra leverage. We use a 1/2" acme thread for our press shaft, which means a more robust thread and less turning due to it's coarser thread. It also means we have a single diameter to work with and can size our drifts to this dimension, this means your bearings are more likely to go in straight. At the other end of the press is our new Quick Nut. This simple part allows you to slide the nut over the press shaft to the desired location and then click it into place and press away. No endless turning, no pinch hazard and no wasted time. Be aware, the quick nut does require a few uses to fully break in. Kit includes a complete handled press head, 12" press shaft (1/2" diameter), quick nut and these drifts: - PF30/1.125" headset - 24mm bottom bracket drifts - 22mm bottom bracket drift, for non drive GXP bottom bracket - 28.9mm bottom bracket drift, for SRAM DUB - 6806 drift for BB30 bottom brackets - 1.5" headset drift - Centering cone We always recommend installing bearings one at a time to ensure they go in straight and don't damage the bearings, components or the tools. Use the centering cone in the empty side of the hub/frame/linkage to keep the press concentric with the bore.

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.

Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims